Washing Steps
-
Turn Inside Out: Place the shirt inside out to shield the print from rubbing against the washer drum or other clothes.
-
Cold Water: Use cold or cool water (under 86°F/30°C) as hot water softens the adhesive.
-
Gentle Cycle: A delicate or gentle cycle reduces agitation and friction.
-
Mild Detergent: Use a mild detergent; avoid harsh chemicals, bleach, or stain removers.
-
No Fabric Softener: Softeners can weaken the print's adhesion.
-
Wash with Similar Items: Limit overloading and wash with like fabrics to prevent tangling.
Drying
Effectively drying your garments after washing is just as important as the washing process. There are a few tips that you can take into consideration if you want to protect the longevity of your DTF transfer:
-
After washing, lay the garment as flat as possible to dry it. Avoid hanging it as the weight of the wet fabric could lead to a stretched transfer.
-
If using a dryer, do so on a cool setting to avoid shrinking or damaging the transfer.
-
Do not dry clean DTF transfer garments as the chemicals used can damage the print.
Ironing
When ironing a garment with a DTF transfer on it, make sure to turn the garment inside out before applying the iron. Use a low temperature setting to help ensure you’re not using excessive heat that could melt or distort the transfer. Also make sure to avoid direct contact between the iron and the transfer.